Geotech Automatic Peristaltic Water Sampler
The Geotech Auto Sampler automatically collects numerous individual discrete samples taken at regular intervals over a period of time. The flow-weighted sample collected is representative of an average concentration of any substance being analyzed. Designed for portable or dedicated applications, the Geotech AutoSampler is effective in outfall, in-stream, manhole, and open-fluid sample point applications.
Applications
• Community/targeted SARS-CoV-2 (COVID-19) early detection
• Wastewater effluent
• Industrial pre-treatment
• Permit compliance
• 24 hour composite sampling
What is included
Round 15.8" (40cm) diam
Enclosure
Auto Sampler Pump and Controller
easy-load II® Pump Head
Sample Bottle Float Switch
Rechargeable Batteries x 2 and Charger x 1
Pump Tube x 5'
Suction Tube x 100'
2.6 Gallon LDPE Sample Bottles x 2
Stainless Steel Suction Intake
DC Power Cord, with AMP & Clip
Optional Items
• Suspension Harness
• AC Power Converter
• Wet Kit – 100' Suction Hose, 5' Silicone, SS Intake
Specifications
System Size (Diam. x Ht.): 15.81 x 23.25 inches (40 x 59 cm)
Weight: Dry Weight – 24 lbs. (12 kg) Wet Weight – 49 lbs. (22 kg)
Sample Bottle: 2.6 Gallon HDPE Bottle
Sample Cooling: Reusable Ice Packs (not included)
Pump Tubing: .25" (6.4mm) ID Standard
.375" (9.5mm) ID Max Flow
Suction Tubing: .25" x .375" (6 x 10mm) Standard
.375" x .5" (10 x 13mm) Max Flow
Intake Strainer: .85" OD Stainless Steel Intake
Pump & Controller
Power Requirements: 12 VDC²
Principle of Pump Operation: Peristaltic Pump
Fluid Delivery Rate: 1800 ml/min Standard – 3400 ml/min Max Flow
Maximum Lift: 29 ft. (8.8 m) Standard at sea level⁴ 27 ft. (8.3 m) Max Flow at sea level⁴
Onboard Battery: 9 Ah Lead-Acid³
Battery Life: 1 hour continuous operation
Sample Mode: LinearIntake Purge: Auto backflush cycle
Start Delay: 0-12 hours⁵
Sample Time: 0-15 minutes⁵ (0-30 seconds and 1 min. – Full)
Sample Interval: 0-12 hours⁵ (0-60 minutes and 2-12 hours)
Sample Size: 50 ml – 10+ liters
Overflow Protection: Shut-Off input float switchSystem Status: LED indicator
Operational Temp: 32°-120°F (10°- 49°C)