iRIS 150FX
Data Logger With Digital Display
Power Supply
External DC supply: Range 5-15V. Reverse polarity/over voltage protected. Internal lithium battery: AA-size 3.6V, 2400 mA/hr on iRIS 150C or a D-size 19000mA/Hr on iRIS 150G.
Communications
SDI-12 instrumentation port.
Non-isolated DTE RS232 at 1200 - 115200 bps (default 38400 bps)
Data Storage
8MB flash memory (1,048,576 samples). A typical site with 2 parameters logged every 15 minutes plus battery voltage logged hourly will give 12 years of storage before data overwrite occurs.
Environmental
Operating: -10ºC - +70ºC.
Storage: -20ºC - +85ºC
Enclosure: IP65 unless the USB port is opened.
Data Logger With Digital Display
Power Supply
External DC supply: Range 5-15V. Reverse polarity/over voltage protected. Internal lithium battery: AA-size 3.6V, 2400 mA/hr on iRIS 150C or a D-size 19000mA/Hr on iRIS 150G.
Communications
SDI-12 instrumentation port.
Non-isolated DTE RS232 at 1200 - 115200 bps (default 38400 bps)
Data Storage
8MB flash memory (1,048,576 samples). A typical site with 2 parameters logged every 15 minutes plus battery voltage logged hourly will give 12 years of storage before data overwrite occurs.
Environmental
Operating: -10ºC - +70ºC.
Storage: -20ºC - +85ºC
Enclosure: IP65 unless the USB port is opened.
Data Logger With Digital Display
Power Supply
External DC supply: Range 5-15V. Reverse polarity/over voltage protected. Internal lithium battery: AA-size 3.6V, 2400 mA/hr on iRIS 150C or a D-size 19000mA/Hr on iRIS 150G.
Communications
SDI-12 instrumentation port.
Non-isolated DTE RS232 at 1200 - 115200 bps (default 38400 bps)
Data Storage
8MB flash memory (1,048,576 samples). A typical site with 2 parameters logged every 15 minutes plus battery voltage logged hourly will give 12 years of storage before data overwrite occurs.
Environmental
Operating: -10ºC - +70ºC.
Storage: -20ºC - +85ºC
Enclosure: IP65 unless the USB port is opened.
REQUEST PRICING
DOWNLOAD PDF
The iRIS 150FX is a small, compact data logger featuring an LCD display and keypad. It can be connected to a wide variety of sensors, and features two analogue (0-5V, 0-20mA) inputs, two digital inputs, SDI-12 serial instrument support and a single digital output for alarm or control purposes. Primary communication is RS232. This can be connected directly to a PC / laptop or else to a telemetry device such as the iQuest iCE3; FX for IP based communication or a radio or dial-up modem. Optional USB slave communication is available via a miniature USB slave connector. The iRIS 150FX is shipped with this connector protected behind the label. NOTE: The front panel must be voided to use the USB port. The iRIS 150FX is configured and managed using the iQuest software products iLink2012 or HydroTel™. It also supports remote firmware and software upgrades.
Available in two models:
iRIS 150FXC. Has an external 14 way terminal block fitted to the base of the enclosure.
iRIS 150FXG. Has two NG12 compression glands providing cable access to a small 12 way I/O connector inside the unit.
ORDERING OPTIONS
iRIS 150FXC. Has an external 14 way terminal block fitted to the base of the enclosure
iRIS 150FXG. Has two NG12 compression glands providing cable access to a small 12 way I/O connector inside the unit.
ACCESSORIES
Computer Interface Cable, Required for Data Retrieval and Configuration
Environmental Enclosure
Rechargeable 12V Battery
Solar Panel
Solar Charge Controller
Contact us for information and pricing on available sensors for your data logger