WA100 Liquid Level Float Switch

WA100 liquid level float switch is easy to install, fully submersible, and includes 20 ft of 22 AWG, PVC jacketed 2-conductor cable. WA100 liquid level float switches are also self-weighted so they can be suspended in a tank, stilling well, or standpipe without the need to tie the float switches off. The point at which the liquid level float switches actuate can be easily adjusted by adjusting the suspension depth as required. The liquid level float switch has a built-in slosh shield that prevents false tripping in turbulent conditions.

The low-cost WA100 liquid level float switch is ideally suited for sumps, dispenser pans, monitoring wells, or double-wall tanks where monitoring for leaks is required. Another great feature of the WA100 liquid level float switch is that it can easily be changed from NC (normally closed) operation to NO (normally open) operation so that it may be used for high or low-level applications. Simply remove the bottom portion of the liquid level float switch's slosh shield and flip the float over to change the function. The liquid level float switch's slosh shield may also be removed for use in applications where there are heavy solids in the water.

Specifications

Liquid Level Float Switch Materials
Stem & extension: Brass
Float: Buna-N
Slosh shield: PBT
Cable: 20 ft AWG 22 w/PVC jacket
Current/voltage ratings:
0.14 A (resistive) @ 220 VAC
0.28 A (resistive) @ 110 VAC
0.07 A (resistive) @ 120 VDC
0.28 A (resistive) @ 24 VDC
Operation:
NC (normally closed): Closes on low level
NO (normally open): Closes on high level
Weight: 0.4Lbs (181g)
Dimensions: 1.44in (3.7cm) diameter x 4in (10cm) long