6309 POT pH/ORP and Temperature Analyzer and Controller
BRAND: JENCO
FEATURES
Dual Parameter Analyzer, Graphic Display
pH/ORP/temperature measurement & control
Display pH electrode efficiency
Reversible & isolated 4 ~ 20 mA output
RS-485 output
Bumpless calibration
Graphic LCD display,128 x 64with backlight
Membrane switch with audio feedback
Auto temp. compensation
High 50/60 Hz noise rejection
Pipe/wall/panel mounting
1/4 DIN watertight enclosure
One programmable relay for temp.
CE approved
Programmable linear/ ORP current output or programmable linear/ anti-logarithmic current output
Contact us for pricing options and availability
BRAND: JENCO
FEATURES
Dual Parameter Analyzer, Graphic Display
pH/ORP/temperature measurement & control
Display pH electrode efficiency
Reversible & isolated 4 ~ 20 mA output
RS-485 output
Bumpless calibration
Graphic LCD display,128 x 64with backlight
Membrane switch with audio feedback
Auto temp. compensation
High 50/60 Hz noise rejection
Pipe/wall/panel mounting
1/4 DIN watertight enclosure
One programmable relay for temp.
CE approved
Programmable linear/ ORP current output or programmable linear/ anti-logarithmic current output
Contact us for pricing options and availability
BRAND: JENCO
FEATURES
Dual Parameter Analyzer, Graphic Display
pH/ORP/temperature measurement & control
Display pH electrode efficiency
Reversible & isolated 4 ~ 20 mA output
RS-485 output
Bumpless calibration
Graphic LCD display,128 x 64with backlight
Membrane switch with audio feedback
Auto temp. compensation
High 50/60 Hz noise rejection
Pipe/wall/panel mounting
1/4 DIN watertight enclosure
One programmable relay for temp.
CE approved
Programmable linear/ ORP current output or programmable linear/ anti-logarithmic current output
Contact us for pricing options and availability
Description
pH & ORP analyzer,1/4 DIN panel mount IP65 case. Features 2 pH and 2 ORP fully programmable relays and one for temperature. RS-485 interface, password protected with individual ID’s. 4 ~ 20 mA analog output is fully programmable, assignable & reversible. Graphical display. Tinned lead connectors. CE Approved.
Accessories for 6309POT Controller
IP-600-10/20T IP-600-10/20T: pH Electrode 3/4" NPT, 20-ft, Tinned Leads, No ATC
pHF-020ST pHF-020ST: pH Electrode 3/4" NPT, 20-ft, Spade Plug, Tinned Leads, No ATC
pHF-020ST/TH pHF-020St/Th: pH/Temperature Electrode 3/4" NPT, 20-ft, Spade Plug, Tinned Leads, 10k ATC
ORPF-020ST ORPF-020ST: ORP Electrode 3/4" NPT, 20-ft, \ Spade Plug, Tinned Leads, No ATC
Specs
pH Range: -2.00 to 16.00 pH
pH Resolution: 0.01 pH
pH Accuracy: ±0.01 pH ± 1 digits
Temperature Range: -10.0 to 120 °C
Temperature Resolution: 0.1 °C
Temperature Accuracy: ±0.1 °C ± 1 digits
ORP Range (Absolute): -2500 to 2500 mV
ORP Resolution (Absolute) 1 mV
ORP Accuracy (Absolute): ±0.2% F.S.
ORP Range (Relative): -6499 to 6499 mV
ORP Resolution (Relative): 1 mV
ORP Accuracy (Relative): ±0.2% F.S.
Temperature Compensation Range: 10.0 to 120.0 °C
Specs
Buffer Recognition: 4.01,7, 10.01 / 4.00,6.86, 9.18
pH Calibration Temperature Range: 0 to 60.0 °C
Electrode Slope Compensation: ±30% of ideal slope
Electrode Offset Compensation: ±100 mV
Input Impedance: >1013 ohms
Calibration Auto End Point Sensing: Yes
pH: 2 programmable high or 2 low
ORP: 2 programmable high or 2 low
Temperature: 1 programmable high or 1 low
Control type: On/Off
Relay Output (Resistive load only): 5 amps at 115 V AC, 2.5 amps at 230 V AC
Specs
Relay Set Point Hysteresis: User programmable
Current output: Isolated 4 to 20 mA
Range: Selectable zero, & span
Accuracy: ±0.02 mA
Isolated Voltage: 500 V DC
Maximum Load: 500 Ω
ATC Sensor: Thermistor 10 kiloohms at 25 °C
Security Protection: 4 digit password
Keypad: Audio feedbackup
Digital output: RS-485 (Modbus protocol)
Pre-amplifier Voltage: ±5 V DC, 20 mA max output
Power Source: 115/230 V AC, 50/60 Hz
Dimensions: 1/4 DIN, depth 148 mm
Weight: 950 g