RGAI-70 Pulse to Analog Signal Converter

from $60.00

Brand: NOVALYNX

Lead-Time: This product ships in approximately 2 weeks from time of order.

The RGAI-70 Rain Gauge Interface converts the signal from a tipping bucket rain gauge into a 4-20 mA current loop signal, ideal for input to a PLC or SCADA system. Each tip of the rain gauge bucket causes the output signal to increase 1% of full scale. Full scale represents 100 tips of the bucket.

What would you like to do?

Download Datasheet

Download Instructions Manual

Request a quote or speak with a product specialist

Item:
Quantity:
Add To Cart

Brand: NOVALYNX

Lead-Time: This product ships in approximately 2 weeks from time of order.

The RGAI-70 Rain Gauge Interface converts the signal from a tipping bucket rain gauge into a 4-20 mA current loop signal, ideal for input to a PLC or SCADA system. Each tip of the rain gauge bucket causes the output signal to increase 1% of full scale. Full scale represents 100 tips of the bucket.

What would you like to do?

Download Datasheet

Download Instructions Manual

Request a quote or speak with a product specialist

Brand: NOVALYNX

Lead-Time: This product ships in approximately 2 weeks from time of order.

The RGAI-70 Rain Gauge Interface converts the signal from a tipping bucket rain gauge into a 4-20 mA current loop signal, ideal for input to a PLC or SCADA system. Each tip of the rain gauge bucket causes the output signal to increase 1% of full scale. Full scale represents 100 tips of the bucket.

What would you like to do?

Download Datasheet

Download Instructions Manual

Request a quote or speak with a product specialist

 

Applications

  • Meterological Studies

  • Irrigation Monitoring/Control

Features

  • +/- 1% Accuracy

  • 4-20 mA Loop Powered

  • 12-24 Vdc Input

  • NEMA Enclosure

  • Rain Detector Mode (4mA = no rain, 20mA = rain detected)

This pulse to 4 - 20 mA signal converter can be used with any tipping bucket gauge that has a dry contact output. The calibration of the gauge can be inches or millimeters. A common calibration unit is 0.01" of rainfall per tip of the bucket. In this case, the full scale output (20mA) represents 1 inch of rain. The output remains constant at the end of each tip until the next tip occurs.

 
Rain Gauge and Pulse to Analog Signal Converter Configuration

These instructions apply only to our pulse to analog signal converter.

Wiring Instructions for a rain gauge and a signal converter

Review the owners instruction manual first before installing your rain gauge and signal converter.

 
SDI-12 To Analog Converter Module
from $144.00
Available for Backorder
Analog to SDI-12 Signal Converter
$770.00
Available for Backorder
RG700 Pulse to Analog Signal Converter
$477.00
Available for Backorder