Point-to-point or Multi-Point Industrial Wireless Signal Transmitters
Brand: Precision Digital
Point-to-Point Wireless Process Signal Bridge
Point-to-Multipoint Wireless Process Signal Systems
FEATURES
Save time and money
Signal Wire Replacement in a Rugged, Industrial Housing
Inputs and Outputs on Both Field Units
Simple to Order, Configure, & Install
1 Mile Line-of-Sight Outdoor, 500 Ft Indoor Range
Inputs: Analog (4-20 mA, 0-10 V, 0-5 V, 1-5 V), Digital, and RS-485 Modbus Communications
Outputs: Analog (4-20 mA), Digital, and RS-485 Modbus® Communications
Remote or Attached Antenna
Repeaters and Directional Antennas Available
Flanges for Wall or Pipe Mounting
Software Available for Even Easier Setup
NEMA 4X, IP68 Enclosure
Power: 12-28 VDC
Approvals: None
Warranty: 3 years
Price varies depending on configuration, contact us for pricing information
Brand: Precision Digital
Point-to-Point Wireless Process Signal Bridge
Point-to-Multipoint Wireless Process Signal Systems
FEATURES
Save time and money
Signal Wire Replacement in a Rugged, Industrial Housing
Inputs and Outputs on Both Field Units
Simple to Order, Configure, & Install
1 Mile Line-of-Sight Outdoor, 500 Ft Indoor Range
Inputs: Analog (4-20 mA, 0-10 V, 0-5 V, 1-5 V), Digital, and RS-485 Modbus Communications
Outputs: Analog (4-20 mA), Digital, and RS-485 Modbus® Communications
Remote or Attached Antenna
Repeaters and Directional Antennas Available
Flanges for Wall or Pipe Mounting
Software Available for Even Easier Setup
NEMA 4X, IP68 Enclosure
Power: 12-28 VDC
Approvals: None
Warranty: 3 years
Price varies depending on configuration, contact us for pricing information
Brand: Precision Digital
Point-to-Point Wireless Process Signal Bridge
Point-to-Multipoint Wireless Process Signal Systems
FEATURES
Save time and money
Signal Wire Replacement in a Rugged, Industrial Housing
Inputs and Outputs on Both Field Units
Simple to Order, Configure, & Install
1 Mile Line-of-Sight Outdoor, 500 Ft Indoor Range
Inputs: Analog (4-20 mA, 0-10 V, 0-5 V, 1-5 V), Digital, and RS-485 Modbus Communications
Outputs: Analog (4-20 mA), Digital, and RS-485 Modbus® Communications
Remote or Attached Antenna
Repeaters and Directional Antennas Available
Flanges for Wall or Pipe Mounting
Software Available for Even Easier Setup
NEMA 4X, IP68 Enclosure
Power: 12-28 VDC
Approvals: None
Warranty: 3 years
Price varies depending on configuration, contact us for pricing information
The Precision Digital point-to-point digital signal transmitter gives you a simple, straightforward way to get an analog, discrete, or Modbus® signal from where you have it to where you need it. It's a point-to-point wireless bridge packaged in a rugged, weather-tight housing that is designed to meet the demands of industrial installations.
The PDW30 is simple to order, simple to configure, and easy to trust with your application. Guaranteed ranges assure it will work with your application or you can send it back - no questions asked. A wireless survey tool is available for those installations that require a site survey for longer distances, making it easy to verify the setup will work the first time.
The primary unit accepts an analog, discrete, or Modbus® input and wirelessly broadcasts it to the secondary unit. The secondary unit then recreates that signal at its location. Just put the units in the field wherever you have a process signal and 24 VDC power.
Fixed or remote antenna modules as well as a wide range of accessories are available, including mounting kits, antenna-related accessories, and repeaters. The antenna may be directly attached or remotely located. High gain directional antennas are also offered.
Use this system with water level transmitters, flow meters, weather sensors, water sampling equipment and much more.
Choose the wireless transmitter system that best works for you, if you are not sure, contact us so we can help you configure a system for your application
PDW90 Point-to-Multipoint Wireless Process Signal Field Unit
PDW90 field units transmit analog, digital, and Modbus® inputs from any location in the field to the PDW90 base station. Just set the network ID and Modbus address and put the field unit wherever there is DC power and a process signal. Once it has been connected to the base station, it will transmit all signal connections wirelessly.
PDW30 gives you a simple, straightforward way to get an analog, discrete, or Modbus® signal from where you have it to where you need it. It’s a point-to-point wireless bridge packaged in a rugged, weather-tight housing that is designed to meet the demands of industrial installations. The PDW30 is simple to order, simple to configure, and easy to trust with your application. Guaranteed ranges assure it will work with your application or you can send it back - no questions asked. A wireless survey tool is available for those installations that require a site survey for longer distances, making it easy to verify the setup will work the first time.
PDW90 field units transmit analog, digital, and Modbus® inputs from any location in the field to the PDW90 base station. Just set the network ID and Modbus address and put the field unit wherever there is DC power and a process signal. Once it has been connected to the base station, it will transmit all signal connections wirelessly.