Air or Water Temperature Transmitter
Brand: Global Water
Model: WQ101/WE700
4 - 20 mA Output
25ft Standard Cable Length
Custom Cable Length Available
Ideal for Air or Water Temperature Measurement
Works With Most Data Loggers, SCADA, PLC
User-Friendly Configuration
The online version comes with ¾ x 6 inch PVC pipe nipple, threaded both ends with cap (¾" NPT PVC housing).
Brand: Global Water
Model: WQ101/WE700
4 - 20 mA Output
25ft Standard Cable Length
Custom Cable Length Available
Ideal for Air or Water Temperature Measurement
Works With Most Data Loggers, SCADA, PLC
User-Friendly Configuration
The online version comes with ¾ x 6 inch PVC pipe nipple, threaded both ends with cap (¾" NPT PVC housing).
Brand: Global Water
Model: WQ101/WE700
4 - 20 mA Output
25ft Standard Cable Length
Custom Cable Length Available
Ideal for Air or Water Temperature Measurement
Works With Most Data Loggers, SCADA, PLC
User-Friendly Configuration
The online version comes with ¾ x 6 inch PVC pipe nipple, threaded both ends with cap (¾" NPT PVC housing).
-
Output 4-20 mA
Range -50° to +50°C
Accuracy ±0.2°F or ±0.1°C
Maximum Pressure Open Water: 0 to 200 psi
Online: 50 psi
Operating Voltage 10 to 36 VDC
Current Draw: Same as sensor output
Warm-up Time 5 seconds minimum
Operating Temperature -58° to +212°F (-50° to +100°C)
Size of Probe Open Water: ¾" dia. x 4½" long (1.9 cm dia. x 11.4 cm long)
Online: 1-3/4" Diameter x 8" L (4.3 cm dia. x 20.3 cm long)
-
Stream and lake monitoring
Aquaculture studies
Baseline analyses
Mitigation monitoring
Other environmental applications
Description
Rugged and reliable device for highly accurate submersible water temperature measurement. The Global Water’s WQ101 Temperature Sensor is a temperature sensor for air or water, molded to 25' of marine grade cable, with lengths up to 500' available upon request. The WQ101 has a two-wire configuration for minimum current draw. The unit’s electronics are completely encapsulated in marine grade epoxy within a stainless steel housing.