TOUGHSONIC CHEM Series
Brand: Senix
The Toughsonic Chemical Series ultrasonic level sensors measure a wide variety of liquids from diesel fuel in rail locomotives to chemical tanks in the paper and food processing industries (not suited for high temperature CIP operations). Heavy duty electronics are epoxy potted into a polyvinylidene fluoride (PVDF) housing that physically isolates the transducer and electronics from the chemicals and can withstand exposure to both acids and bases. They are used both indoors and out, and in some of the harshest factory environments. They of course also are used in liquid level applications where chemical resistance is not required.
Features
Suitable for use in diesel fuel and chemical level applications in closed or open tanks
Chemical Tanks & Environmental Applications
Operating Temperature: -40 to +70C
Ingress: IP68, NEMA-4X, NEMA-6P
User-adjustable with SenixVIEW software (included) for setup, testing and cloning sensors
Call for pricing and availability.
Review each product’s datasheet for additional details or contact us.
CHEM series sensors and SenixVIEW soft ware put the power of ultrasonics in your hands. Adjust, optimize, save and clone your applications quickly without calibration! These sensors are contained in a rugged, chemically inert PVDF sealed housing for long life. They mount above the material surface and measure distance downward without contact. All outputs respond simultaneously to the measured distance. Non-Contact Ultrasonic Distance & Level Measurement Applications include pump control, bulk inventory, flumes/weirs, batch processing, water management and high/low level alarms.
TOUGHSONIC CHEM 14 ULTRASONIC LEVEL SENSOR
Features
Non-contact level measurement
Rugged, compact chemically resistant PVDF housing
Short nose and deadband measures closer to full tank
Integral cable strain relief
IP68 rated (submersible)
Indoor or outdoor application
Top and bottom mounting threads
Five outputs plus serial data
Temperature compensation
PC configurable
Applications
Chemical tank levels
Liquid levels in tanks or open air environments
Chemical environments compatible with PVDF
Tanks up to 14-ft (4.3 m) tall
1.5 in NPT bottom thread, 1.0 in. NPT top thread
Maxumum Range 14 feet (4.3 meters)
TOUGHSONIC CHEM 20 ULTRASONIC LEVEL SENSOR
Features
Non-contact level measurement
Rugged construction, IP68 rated
Indoor or outdoor uses
Top and bottom mounting threads
Five outputs plus serial data
Serial data-only models
Temperature compensation
PC configurable
Applications
Chemical tank levels
Benign liquid tank levels
Tanks up to 20-ft (6.1 m) tall
1-1/2 inch NPT or BSP tank fittings
Maximum Range 20 Feet (6.1 Meters)
TOUGHSONIC CHEM 35 ULTRASONIC LEVEL SENSOR
Features
Non-contact level measurement
Rugged construction, IP68 rated
Indoor or outdoor uses
Top and bottom mounting threads
Five outputs plus serial data
Serial data-only models
Temperature compensation
PC configurable
Applications
Chemical tank levels
Benign liquid tank levels
Tanks up to 35-ft (10.7 m) tall
2 inch NPT or BSP tank fittings
