TR-525 8" Tipping Bucket Rain Gauge
BRAND: Texas Electronics
This item ships in approximately 3 - 5 days.
FEATURES
Calibration 0.01”/Tip or 0.2mm/Tip
3 Years Factory Warranty
Meets government requirements for an 8” collector
Interfaces with virtually all data acquisition systems
Knife-edge collector optimizes rainfall catch
Exceptional splash-out protection improves accuracy in high winds
Easy installation and maintenance
Over 30 years in production
Lightweight aluminum exterior
Anodized aluminum collector for weather resistance
Integrated bubble level
Do you need a quote for budgetary purposes? Call or send us an email
BRAND: Texas Electronics
This item ships in approximately 3 - 5 days.
FEATURES
Calibration 0.01”/Tip or 0.2mm/Tip
3 Years Factory Warranty
Meets government requirements for an 8” collector
Interfaces with virtually all data acquisition systems
Knife-edge collector optimizes rainfall catch
Exceptional splash-out protection improves accuracy in high winds
Easy installation and maintenance
Over 30 years in production
Lightweight aluminum exterior
Anodized aluminum collector for weather resistance
Integrated bubble level
Do you need a quote for budgetary purposes? Call or send us an email
BRAND: Texas Electronics
This item ships in approximately 3 - 5 days.
FEATURES
Calibration 0.01”/Tip or 0.2mm/Tip
3 Years Factory Warranty
Meets government requirements for an 8” collector
Interfaces with virtually all data acquisition systems
Knife-edge collector optimizes rainfall catch
Exceptional splash-out protection improves accuracy in high winds
Easy installation and maintenance
Over 30 years in production
Lightweight aluminum exterior
Anodized aluminum collector for weather resistance
Integrated bubble level
Do you need a quote for budgetary purposes? Call or send us an email
8” Tipping Bucket Rain Gauge
The TR255USW Rain Gauge is a freestanding receptacle for measuring precipitation through an opening at the top of the device, rain is collected and then funneled to a mechanical device, called a tipping bucket. As water is collected, the tipping bucket fills to the point that it tips over, causing a momentary closure of a switch to incrementally measure rainfall accumulation. This action empties the bucket in preparation for additional measurement. Water discharged by the tipping bucket passes out of the rain gauge with no need for emptying.
The TR-525USW is specifically designed to meet the National Weather Service's requirements for rainfall measurement.
Ordering Options and Accessories
8-Inch Tipping Bucket Rain Gauge 0.01/Pulse (English)
8-Inch Tipping Bucket Rain Gauge 0.2 mm (Metric)
Dual Reed Switch
HT-525 Heater - 120 VAC
Calibration Certificate
Bird B Gone Strip
Pole Mounting Base
Siphon Option
Pulse to analog converter
260-RGAI-70 Rain Gauge Analog Interface
The 260-RGAI-70 Rain Gauge Interface converts the signal from a tipping bucket rain gauge into a 4-20 mA current loop signal, ideal for input to a PLC or SCADA system. Each tip of the rain gauge bucket causes the output signal to increase 1% of full scale. Full scale represents 100 tips of the bucket.
Heater Option
Should be used where snow or freezing weather may occur. It consists of two low-power heating elements that prevent disruption in readings during freezing times. The heaters are thermostatically controlled with an additional thermal overload. More information available under downloads tab.
NOTE: Heater options requires 120VAC Power Souce.
Bird Spikes
Bird Spikes fit onto the Tipping Barrel Rain Gauges to prevent birds from sitting on the edge. The spikes are made out of anodized aluminum and attach with a single philips screw. The spikes can be oriented straight up (as pictured) or bent by hand if a staggered orientation is desired.
Bird Spikes is a 30" long strip with holes every 2 inches. This works well for roofs and signs. The aluminum can be bent by hand and cut with tin snip.
Shipping Note: To save on shipping costs buy the 3-Pack Option.
-
RESOLUTION: 0.01" or 0.2 mm
ACCURACY: 0-2 in. (50 mm) per hour; +/-1%
COLLECTOR DIAMETER: 8.00" (203 mm) with knife-edge
FUNNEL DEPTH: 6.4" (163 mm)
SPLASH OUT PROTECTION: >2" (50 mm)
OPERATING TEMP: 32 to 158°F (0 to 50°C)
STORAGE TEMP: -40 to 185°F (-40 to 70°C)
HUMIDITY LIMITS: 0 to 100%
WEIGHT: 1.8 lbs.
HEIGHT: 11.125"
CABLE: 10', 24 gauge 2 conductor
SWITCH Momentary: potted reed switch
SWITCH RATING: 30 VDC @ 2 A, 115 VAC @ 1 A
SWITCH CLOSURE TIME: 135 ms
BOUNCE SETTING TIME: 0.75 ms
PIVOT: Ground bronze pivots with hardened stainless steel shaft
BUCKET: Black PP injection molded
LEVEL: Integral Bubble Level
RANGE 27" (700 mm) per hour
WARRANTY 3 years
